Scale Marked Screed Leveling Tripod/ 30ea-"no corrod " "140g"

Description

눈금 표시 스크 리드 레벨링 삼각대
•
액상 모르타르의 높이를 확인하기위한 것입니다.
•
사용하기 쉽도록 레이저 라인을 중심 축 눈금자에 정렬하는 방법.
•
모든 스테인리스 스틸 및 ABS 고유의 부식 방지.
•
Folds for convenient storage and transport box storage.
•
Adjustable height between 5 and 110mm material depth.
•
Scale display support range 20 ~ 160mm
•
Easy and fast installation with multiple laser levels and multiple personnel
•
Stability of position with a product weight of 140 grams
< Picture and Description >
※
Caution
(1) Reproduction of this manual in whole or in part is prohibited.
(2) The contents of this manual are subject to change without notice.
(3) If you have any questions, such as where the contents of this manual are incorrect or where the description is missing, please contact J & C Tech.
Handling precautions and recommendations
☞
This screed leveling tripod is a reusable product.
☞
When storing, it is recommended to lubricate and store foreign substances on the ruler part with water.
☞
Be careful of damage caused by falling, hitting, cleaning, etc.
☞
As it is installed on the floor, the laser level is highly recommended for laser beams.
☞
It is recommended to use multiple levels and multiple personnel.
☞
It depends on the skill level, but it is recommended to use ink on the wall.
How to Use
1) Layout of Line Laser Leveling Machine and Screed Leveling Tripod
Operate the line laser level in a position where you can check the level of the floor surface.
①
Adjust the attached tripod support and use a line laser level (b) to level it.
②
Using a separate bracket, the height of the line laser level (b) and regulator can be adjusted.
- Place the Screed Leveling tripod at 1.5 ~ 2m intervals.
- If the floor is insulated and aerated concrete, the Screed Leveling tripod can be pressed against the floor surface to fix it.
2) Screed Leveling Tripod (a) adjustment
- Check the planned floor height and spacing of the laser line once with a tape measure.
- Turn the handle of the Screed Leveling tripod (a) to align the measured value of the central axis with the laser line.
- Several laser levels (b) can be used.
- Several people can operate the Screed Leveling tripod (a).
- After adjusting the height checker, collect the laser level.
3) zoning space adjustment
- After installation, install a separate laser leveler (b) where the Screed Leveling tripod (a) is visible.
-먼저 조정 및 조정 된 Screed Leveling 삼각대 (a)에서 별도의 레이저 레벨러 (b) 라인 치수를 확인합니다.
-확인 된 치수에 따라 다른 Screed Leveling 삼각대 (c)를 조정합니다.
4) 모르타르 도포
-각기구의 중앙 축 하단에 배치 높이 체크에 따른 유동 모르타르.
-설치면을 덮지 않도록 조심스럽게 모르타르를 엎 지르십시오.
5) Screed Leveling 삼각대를 꺼냅니다.
-스크 리드 Dapple bar를 사용하여 각 Screed Leveling 삼각대 사이의 간격을 높이까지 벌리고 Screed Leveling 삼각대 (b)를 수집합니다.
-사용한 스크 리드 레벨링 삼각대 (b)를 물로 청소하고 재사용하십시오.
-회전 나사 및 자의 중심 축에 윤활유를 도포하여 이물질 제거가 용이합니다.